NC Labs – компьютерные комплектующие, разработка средств автоматизации в промышл
Разработка и производство электронных устройств
Промавтоматика, системы управления, машинное зрение
Дистрибуция компьютерных компонентов
Мультипортовые платы, контроллеры, миникомпьютеры, видеонаблюдение
+7 (495) 517-32-32
+7 (495) 542-38-47
zakaz@nclabs.ru
назад в раздел : Контроллеры мультипортовые (RS-422, RS-485, combo) : PCI Express

Sunix IPC-E2102

NC Labs – компьютерные комплектующие, разработка средств автоматизации в промышл
button

Sunix IPC-E2102 – Промышленная мультипортовая плата 2*RS-422/RS485, PCI Express.

Промышленная мультипортовая плата с двумя последовательными портами (RS-422/RS-485) для шины PCI-E

Розница Оптом
CALLCALL

Информация о Sunix IPC-E2102

SUNIX IPC-E2102, industrial standard PCI Express serial communication card, allows users to expand two RS-422/485 ports on PC-based system.
Each serial port achieves data rates up to 921.6 Kbps and utilizes 16C950 UART with an on-chip 128-bytes hardware FIFO buffer for reliable, high-speed serial I/O.
With SUNIX patented Auto-Switching RS-422/485 and RS-485 AHDC? technology, user can easily manage different serial interfaces selection and RS-485 signal direction control.
Under RS-485 mode, the board can connect up to 31 daisy-chained RS-485 devices within a range of 1.2 km. SUNIX serial board supports a wide variety of operating systems, including Windows, Linux, DOS, and UNIX.
It is the best serial communicating solution for industrial and harsh environment applications.

Features
Expands 2 independent RS-422/485 serial ports with communication speeds up to 921.6Kbps.
High reliability SUN1989 16C950 compatible UART controller on-board.
Compliance with PCI Express 1.1 BUS specifications.
RS-422/485 auto detect and switching technology ? jumper and software free
AHDC/CSTM technology for collision free communication
Ultra low power consumption design for Green Environment.
Built-in 15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
Plug-n-Play, I/O address and IRQ assigned by BIOS
Certified by CE, FCC, RoHS, and Microsoft WQHL approval
Support Microsoft Windows, Linux, and DOS

Interface : RS-422/485
Controller UART: SUNIX SUN1989 (16C950 UART Compatible)
Bus : PCI Express one lane (x1)
No. of Ports : 2-port
IRQ & IO : Assigned by System
FIFO : 128 byte (Hardware)
Signals RS-422 : TxD+, TxD-, RxD+, RxD-, GND
4-wire RS-485 : TxD+, TxD-, RxD+, RxD-, GND
2-wire RS-485 : Data+, Data-, GND
Baud rate : 50 bps to 921.6 Kbps
Data bits : 5,6,7,8
Stop bits : 1,1.5,2
Parity : None, Even, Odd, Space, Mark
Flow Control : Xon/Xoff (software)
Protection : ?15KV ESD protection for each signal Human Body Model (HBM); ?15KV IEC1000-4-2 Air Gap Discharge; ?8KV IEC1000-4-2 Contact Discharge

Driver Support
Microsoft Client : Windows XP/Vista/7 (X86/X64)
Microsoft Server : Windows 2000/2003/2008 (X86/X64)
Microsoft Embedded : Windows CE5.0/6.0/XP Embedded/POS Ready 2009/Embedded System 2009
Linux : 2.4.x / 2.6.x
DOS : DOS

Environment
Operation Temperature : 0 to 70°C (32 to 158°F)
Operation Humidity : 5 to 95% RH
Storage Temperature : -20 to 85°C (-4 to 185°F)

Dimension
PCB Dimension : 99 x 86 mm
Bracket : Standard 121 mm
Bracket Space : 1