Sunix IPC-P2102LI
|
 Sunix IPC-P2102LI – Промышленная плата 2*RS-422/RS485, PCI с изоляцией. Промышленная мультипортовая плата с двумя портами (RS-422/RS485) с гальванической изоляцией для шины PCI, низкопрофильная
|
Информация о Sunix IPC-P2102LI
SUNIX IPC-P2102LI, industrial standard universal PCI serial communication card, allows users to expand two RS-422/485 ports on PC-based system. Each serial port achieves data rates up to 921.6 Kbps and utilizes 16C950 UART with an on-chip 128-bytes hardware FIFO buffer for reliable, high-speed serial I/O. With SUNIX patented Auto-Switching RS-422/485 and RS-485 AHDCTM technology, user can easily manage different serial interfaces selection and RS-485 signal direction control. Under RS-485 mode, the board can connect up to 31 daisy-chained RS-485 devices within a range of 1.2 km.
SUNIX IPC-P2102LI uses on-board 2500V optical isolators which achieve on power and serial signal lines to protect your PC and equipment against damages from ground loops, increasing system reliability in harsh environments. To further increase reliability, this board offers 500W surge protection technology, protecting your system from abrupt high voltage surges, such as those caused by lightning. SUNIX serial board supports a wide variety of operating systems, including Windows, Linux, DOS, and UNIX. It is the best serial communicating solution for industrial and harsh environment applications.
- FEATURES
Expands 2 RS-422/485 serial ports with communication speeds up to 921.6Kbps.
Circuit Damage Protection of 600W Peak Per IEC 61000-4-5.
2.5 KV Isolation Protection for all signal and power.
High reliability SUN1989 16C950 compatible UART controller on-board.
Compliance with PCI 33MHz Ver 3.0, 2.3, 2.2 & 2.1 specifications.
Supports both 64-bit & 32-bit PCI bus slot and 3.3V & 5V power.
RS-422/485 auto detect and switching technology – jumper and software free.
AHDC/CS™ technology for collision free communication.
Ultra low power consumption design for Green Environment.
Built-in 15KV ESD protection for all serial signals meets IEC1000-4-2.
Plug-n-Play, I/O address and IRQ assigned by BIOS.
Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
Support Microsoft Windows, Linux, and DOS.
- SPECIFICATIONS
Interface RS-422/485
Controller SUNIX SUN1989 (16C950 UART Compatible)
BUS Universal PCI 64/32bit 3.3V/5V, PCI Ver 3.0, 2.3, 2.2, 2.1
No. of Port 2-port
IRQ & IO Assigned by System
FIFO 128byte Hardware
Signal
RS-422: TxD+, TxD-, RxD+, RxD-, GND
4-wire RS-485: TxD+, TxD-, RxD+, RxD-, GND
2-wire RS-485: Data+, Data-, GND
Baud rate 50bps ~921.6Kbps
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control Xon/Xoff (software)
Surge Protection Circuit Damage Protection of 600W Peak Per IEC 61000-4-5
Isolation 2.5 KV Isolation Protection for all signal and power
PCB Connector DB44 Female
Cable Connector DB9 Male
- Driver Support
Windows Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x / 5.3
DOS DOS
*UNIX FreeBSD / QNX / SCO OpenServer / SCO UnixWare / Solaris
"*" marked as a project supported operating system. Please contact us if you have any further need.
Regulatory Approvals
Hardware CE, FCC, VCCI, BSMI
Software Microsoft WHQL Windows
• Windows Client: XP / Vista / 7 / 8.x / 10 (X86/X64)
• Windows Server: 2003 / 2008 / 2012 / 2016 (X64)
- Environment
Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)
- Dimension
PCB Dimension 120 x 63 mm
Bracket
Low Profile 80 mm
Accessory: Standard 121 mm